The PM-3604 is a hot pressing device for Thermofix, Flexproof, and Step-Flex joining of Habasit belts and tapes up to a width of 3,600 mm and a thickness of 10 mm.
The PM-3204 are a range of hot-pressing devices for joining of Habasit belts. They are capable of Thermofix (skived) Flexproof (finger) and Step-Flex (finger over finger) joining of all Habasit belts which can be joined in the standard temperature range
The AT-60 is a preparing device for skiving of Habasit belts and tapes up to a width of 60 mm and a thickness of 2 mm. The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in maintenance.
The PF-101 is a hot-pressing device for joining of Habasit belts and tapes up to a width of 100 mm and a thickness of 6 mm. Maximum finger length is 80 mm. It is designed mainly for Flexproof but Thermofix is also possible.
The AF-30 is a device for preparing (die-cutting) of Habasit belts and tapes up to a width of 30 mm and a thickness of 3 mm for Flexproof (finger) joints. It is suitable for the standard Habasit finger geometries with a pitch of 6 or 8 x 30 mm (different cutting heads).
The PT-300 is a hot-pressing device designed for joining Habasit driving and conveyor belts up to 300 mm wide and 8 mm thick using the Thermofix procedure. The hot-pressing device PT-300 is suitable for both workshop and portable use.
_thumbcr_790x535.jpg)
.jpg)
_thumbcr_122x83.jpg)
_thumbcr_122x83.jpg)
