PQ-02

Manufacturer: HABASIT (Switzerland)
Quickmelt welding tool, designed for joining round belts. It consists of a W-01 welder and CQ-02 clamping device
 

Orther products

Product
Features, Application
PT-100

PT-100

Mã SP:
Hot-pressing device for Thermofix offline joining of belts up to 100 mm wide and 6 mm thick.
AT-306

AT-306

Mã SP:
The AT-306 is a preparing device for skiving of Habasit belts up to a width of 300 mm and a thickness of 8 mm.
The AT-306 is especially suitable for preparation of Thermofix joints of power transmission belts in the fabrication workshop in large series.
PT-50

PT-50

Mã SP:
Hot-pressing device for Thermofix joining of belts up to 50 mm wide and 2 mm thick. It is especially suitable for offline joining of spindle tapes and machine tapes
PF-101

PF-101

Mã SP:
The PF-101 is a hot-pressing device for joining of Habasit belts and tapes up to a width of 100 mm and a thickness of 6 mm. Maximum finger length is 80 mm. It is designed mainly for Flexproof but Thermofix is also possible.
AF-61/0

AF-61/0

Mã SP:
The AF-61/0 is a preparing device (die-cutting tool) for 8x30 mm Flexproof finger geometry. It is designed mainly for Habasit machine tapes and belts up to 3 mm thickness. The AF-61/0 has a movable cutting head with two blades. It can be positioned by a pin in steps of 8 mm, ensuring the required accuracy.
PM-459

PM-459

Mã SP:
Equipped with 160 platens, Model PM-459 features 450 mm max belt width. Units include insulation to avoid excessive heating of press body, and plastic sliding pad on bottom of press to prevent damage to conveyors during installation and to optimize stability during joining.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16