Hot-pressing device for Thermofix joining of belts up to 50 mm wide and 2 mm thick. It is especially suitable for offline joining of spindle tapes and machine tapes
The PF-101 is a hot-pressing device for joining of Habasit belts and tapes up to a width of 100 mm and a thickness of 6 mm. Maximum finger length is 80 mm. It is designed mainly for Flexproof but Thermofix is also possible.
The AT-201 is a preparing device for skiving of Habasit belts and tapes up to a width of 200 mm. The AT-201 is suitable for preparation of belts and tapes in small- to medium-sized series.
The AF-30 is a device for preparing (die-cutting) of Habasit belts and tapes up to a width of 30 mm and a thickness of 3 mm for Flexproof (finger) joints. It is suitable for the standard Habasit finger geometries with a pitch of 6 or 8 x 30 mm (different cutting heads).
The PM-3604 is a hot pressing device for Thermofix, Flexproof, and Step-Flex joining of Habasit belts and tapes up to a width of 3,600 mm and a thickness of 10 mm.
The AFZ-1200 is used for efficient die-cutting of Habasit belts and tapes up to a width of 1,250 mm and a thickness of 8 mm for the Flexproof or Step-Flex (only two-ply belts) joining methods. It is suitable for all standard Habasit finger geometries with a pitch of 10 mm or 20 mm
_cr_420x444.jpg)
