The PF-62 is a hot pressing device for joining of Habasit power transmission belts made of thermoplastics up to a width of 60 mm and a thickness of 3,6 mm with the Flexproof method.
The AF-30 is a device for preparing (die-cutting) of Habasit belts and tapes up to a width of 30 mm and a thickness of 3 mm for Flexproof (finger) joints. It is suitable for the standard Habasit finger geometries with a pitch of 6 or 8 x 30 mm (different cutting heads).
The AF-100/US is a device for preparing (die-cutting) Habasit belts and tapes up to a width of 100 mm and a thickness of 6 mm for Flexproof (finger) joints.
The PM-3604 is a hot pressing device for Thermofix, Flexproof, and Step-Flex joining of Habasit belts and tapes up to a width of 3,600 mm and a thickness of 10 mm.
The PM-1604 is a hot pressing device for Thermofix, Flexproof, and Step-Flex joining of Habasit belts and tapes up to a width of 1,600 mm and a thickness of 10 mm.
The AT-60 is a preparing device for skiving of Habasit belts and tapes up to a width of 60 mm and a thickness of 2 mm. The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in maintenance.
_cr_420x444.jpg)
